Over Temperature Alarms

We have a range of temperature alarms for over-temperature monitoring.  In the event that the temperature rises above the user-defined maximum, our temperature alarms will immediately go into alarm state. This can trigger audio-visual alarms that can indicate which specific zone is affected with multizone systems. Changeover relays can also enable the system to connect to other systems, including a BMS and telephone dialler or SMS, to alert that over temperature has been detected.

Temp Tek

Entry level over temperature alarm

An entry level, compact over-temperature detection system. Using one or more room temperature sensor, the Temp Tek can be configured to monitor for abnormal temperature activity between 0 – 30°C. When the maximum defined temperature is reached, the Temp Tek immediately goes into an audio-visual alarm. An alert can also be sent to a BMS or other systems, via a changeover relay. The Temp Tek panel can be located in either the room being monitored or externally.

Example applications: Computer room, data centre, comms room, server room or plant room

Temp Tek 2 & Temp Tek 4

Over temperature alarms for 2 or 4 zones

A compact and economical over-temperature detection system covering two or four separate rooms or zones. The system can be operated from a central point to set an upper and lower temperature band, between 5 – 30°C. When the adjustable temperatures are breached, the system triggers an audio-visual alarm, which specifies which zone has been affected. These devices can also be connected to other alert systems, such as a BMS, or initiate mechanical valves and pumps, via a relay. The panel can be located either in the room being monitored or externally.

Example applications: Computer rooms, data storage centres, comms rooms, server rooms and plant rooms.


Multi zone humidity and over temperature alarm

A multi-zone over-temperature detection alarm that can monitor up to 32 individual areas. The OGW can also monitor for over-humidity in critical areas, such as server rooms and data centres. The system can be configured to set and adjust upper and lower temperature and humidity parameters. The OGW monitors temperatures between 5 to 30°C and humidity between 30 – 100%RH. In the event that the temperature or humidity goes above the user-defined maximum, the OGW will immediately go into alarm. This triggers an audio-visual alarm that can indicate which specific zone is affected. Changeover relays also enable the OGW to be connected to other systems, including a BMS and a telephone dialler, to alert that over-temperature has been detected.

Example applications: Computer rooms, comms rooms, server rooms, data centres and plant rooms where excess temperature will adversely affect the performance of the equipment housed in it.

SMS Temperature Alarm

Single zone temperature alarm with SMS alerts

A simple, low-cost single-zone over-temperature detection system that will ensure that the temperature in a cold store or computer room is maintained within the correct limits. Should the temperature exceed the pre-defined limits, the device will send a text message to up to five telephone number to alert the user to the situation. Temperature limits can be set to any temperature between -50°C and 50°C, using an external temperature probe. Text messages can also be tailored to enable recipients to react in an appropriate way, depending on the situation, from anywhere in the world.

Example applications: Freezer cold stores, computer rooms, server rooms, data centres and any environment that requires a controlled temperature environment.

Contact us Today

To speak to a leak detection specialist about your requirements or find out about our comprehensive services, please either visit the contact page to send an enquiry or call on 01249 715698