Fluid & Water Level Alarm Systems

We have a range of environmental alarms for monitoring fluid levels

Septic Tank Alarms

SMS-enabled fluid level alarms that have four alarm inputs and can be connected to a high-level float switch and pressure switch to detect loss or air blower pressure. When triggered, the device can send text messages to up to five different telephone numbers. Text messages can be tailored to enable the recipient to react in an appropriate manner depending on the situation, from anywhere in the world. Furthermore, the device can be set up remotely, via text message. The SMS alarm panel comes with a built-in mains fail detector and a battery backup that will keep the panel online for up to 48 hours. There is also an optional remote pump reset function and the alarm panel can be supplied with a flashing beacon and klaxon alarms.

Example applications: Sewage treatment plants, pumping stations and biological treatment plants.

Rotating Biological Contactor Alarm (RBC)

Easy-to-install, simple-to-operate SMS text messaging fluid level alarms, specifically designed for monitoring RBC or similar biological treatment plants. The RBC works in conjunction with rotational sensors and works by counting the number of pulses in an hour. A pre-defined threshold is configured and when it falls below this, the RBC alarm sends a text message to up to five designated telephone numbers. The text messages can be tailored depending on the failure that has been detected. The RBC also has the ability to monitor for rotation failure, high fluid levels and loss of air pressure. The RBC ensures that the plant meets CEN alarm standard requirements. The installation of an RBC alarm can prevent pollution incidents and possible prosecutions.

Example applications: Rotating biological contactor or similar biological treatment plants.

Klaxon/Beacon Alarm

A low-cost, easy-to-install solution developed to provide a loud klaxon and flashing beacon in the event of a failure or high fluid level being detected in a treatment plant, pumping station or storage tank. When attached to a float switch, the alarm will trigger when levels exceed a predetermined limit. When triggered, a 100dB alarm sounds along with a bright xenon flashing beacon. The klaxon alarm is supplied in a weatherproof enclosure with the option to run the device from either mains or solar power, making it suitable for use in remote areas.

Example applications: Septic tanks, sewage treatment plants, pumping stations, oil storage tanks and chemical bunds.

Contact us Today

To speak to a specialist in water level alarms or find out about our comprehensive support services, please either visit the contact page to send an enquiry or call on 01249 715698

CONTACT